|
|
SET UP, FILL, AND REFILL OF UNIT 1. Place lid on dispenser. For safety, dispenser will not operate without the lid in place. 2. Press the "REFILL" button on the back of the unit. You will hear the inside table lower. 3. Remove lid and fill container with cereal. (Note: some larger cereals and oatmeals will not work with this dispenser). 4. Close top. 5. On the back of the unit, press the desired portion amount you want to dispense (we suggest starting with the lowest). 6. Press a bowl against the front dispensing mechanism until cereal begins coming out of the chute. The unit is now ready. |
INSTRUCTIONS |
DISPENSING CEREAL 1. Press bowl against the dispensing mechanism and the cereal will dispense. 2. Upon releasing the dispensing mechanism, another portion will be refilled into the visible dispensing chute. 3. When the dispenser needs to be refilled, a rapid beeping sound will be emitted. Refer to Set up, Fill, and Refill above. |
RECHARGING THE FRESHNESS PACKET 1. Remove the dispenser's top, turn it over, and inspect the freshness packet. If it is pink in color, then it is time to be recharged. 2. Slide the freshness packet storage holder out and open it. Remove the freshness packet. 3. Place the freshness packet in the Microwave oven for 30 seconds as directed by FRESHNESS PACKET MANUFACTURER. Be careful as packet may be hot after microwaving. This process removes collected moisture and allows the packet to work as designed. 4. Replace the freshness packet in the holder, slide the holder into place on the top, and replace the dispenser's top on the unit. |
BREAKFIX CEREAL DISPENSERS |
MEMBER |